Category Archives: Actuators

Schaeffler Fully integrated linear actuator and rolling bearing units designed for solar tracking systems

Powertransmissions - Schaeffler Fully integrated linear actuator and rolling bearing units designed for solar tracking systems

Photovoltaic (PV), concentrating photovoltaic (CPV) and concentrating solar power (CSP) systems operate more efficiently when their mirrors, collectors and PV modules accurately track the course of the sun during the day. The more precise and trouble-free these systems are, the more efficient and profitable the solar power plants operate.

By offering its linear actuator and bearings for swivel drives as a complete system, Schaeffler has taken another step towards the full integration of precision solar tracking systems for azimuth and elevation axes.

The linear actuator responsible for stroke movements in the elevation axis was custom designed to withstand the harsh operating conditions typically found in solar power plants. The linear actuator is designed for dynamic loads of up to 5kN and static loads of up to 15kN. The actuator can reach a stroke travel of up to 1,000mm at a stroke speed of 5 mm/s.

The complete mechatronics system comprises the rolling bearings for the individual bearing positions, screw drive spindle and spindle nut, extension tube, compact housing with cover, seal, drive technology (motor and gearbox unit), the sensors, and rod end for connecting the actuator. The innovative design and high flexibility of the unit allow the stroke length and mounting to be matched precisely to individual customer requirements.

The linear actuator can operate in high temperatures and is protected from dust, sand, wind and rain. Due to an encapsulated housing, a reduced number of fully-sealed joints, as well as an integrated motor, gearbox unit and entire drive technology, the linear actuator is able to operate maintenance-free. The sealing components provide the actuator with an IP66 protection rating, which prevents the ingress of contaminants such as water and sand. With its low-maintenance requirements and bearing supports, the linear actuator provides an operating life of up to 25 years.

The high precision axes ensure that the solar power plants generate optimum power output on a continuous basis. Schaeffler’s linear actuator concept can also be adapted for use in other sectors or applications depending on the technical and geometrical requirements.

Bearings for precision swivel motion

Schaeffler’s AXS angular contact rolling bearings and FAG X-life tapered roller bearings support the swivel drives that adjust the azimuth axis. These bearings have a high load carrying capacity and can be set clearance-free. This is an important prerequisite for high rigidity and positioning accuracy and therefore the efficiency of the entire tracking system.

The AXS series of rolling bearings have cylindrical rollers and raceways that are arranged at an angle to the bearing axis. The roller and cage assemblies comprise cylindrical rollers that are snapped into high-rigidity plastic cages with very close spacing. This means that high load ratings are achieved. A special feature of the AXS series are the conical bearing rings. These are manufactured using forming methods, making them cost-effective. In addition, turned bearing seats are sufficient for supporting the bearing rings. This reduces the cost of adjacent components.


Source: Schaeffler UK

ContiTech – Industrial Air Actuators from ContiTech now ATEX-certified

Powertransmissions -  ContiTech - Industrial Air Actuators from ContiTech now ATEX-certifiedContiTech Air Spring Systems now also offers air actuators that fulfill the requirements for ATEX certification. This makes them suitable for numerous applications in industrial sectors with explosion-prone areas. As Category 2 and 3 equipment (Equipment Group II), they can be used particularly in atmospheres containing gas or dust. The ATEX-certified products from ContiTech are available as single-, double- and triple convolution products with diameters from 80 mm to 950 mm.


The ATEX guideline has been in force in the European Union since 2003 and is applicable for pneumatic components among others. “The certification of our air actuator products was an important step. We can now supply our industrial customers with an alternative design for pneumatic applications in potentially explosive areas,” explains Dr. Olaf Kluth, segment manager at ContiTech Air Spring Systems. For more than 50 years, ContiTech air springs and air actuators have been used for an extremely wide range of industrial applications. ContiTech air springs and air actuators exhibit uniquely impressive product properties and long service life under demanding operating conditions.


Source: Contitech

Fatal error: Uncaught Error: Call to undefined function twentytwelve_content_nav() in /home/powertra/public_html/wp-content/themes/shop/category.php:40 Stack trace: #0 /home/powertra/public_html/wp-includes/template-loader.php(106): include() #1 /home/powertra/public_html/wp-blog-header.php(19): require_once('/home/powertra/...') #2 /home/powertra/public_html/index.php(17): require('/home/powertra/...') #3 {main} thrown in /home/powertra/public_html/wp-content/themes/shop/category.php on line 40